86-22-58165950
D218, No. 369, Jinjiang Road, TangGu Marine Science and Technology Park, Binhai New Dist., TianJin, China (Mainland)
New t14 iso tank container 20ft
1.1 General introductions:
1.1.1 Approval by BV, LR, CCS.
1.1.2 Meet requirement of IMO/IMDG, ISO, UN, CSC, TIR, UIC, TC, ADR/RID
1.1.3 Materials: Main body: Corten-A steel, Vessel: Stainless Steel 316L
1.2 Picture Display_20ft t14 iso tank container:
1.3 Specifications_t14 iso tank container 20ft:
Specifications(UNT14 Portable Tank): | |||
frame Dimensions (L x W x H) | External | 6058 x 2438 x 2591 | MM |
20 x 8 x 8.5 | FT | ||
Max. Capacity (Nominal) | 10,900L 15,000L 17,500L 21,000L 24,000L 25,000L 26,000L 31,000L 33,000L 35,000L | L | |
Max. Gross Mass | 36,000 | KGS | |
Tare Mass (Nominal) | --- | KGS | |
Max. Payload | 32450 | KGS | |
Pressure | Working pressure | 4.0 | Bar |
Test pressure | 6.0 | Bar | |
Design Temperature | frame | -40 to +130 ℃ | |
Tank | |||
Material | frame | SPA-H,Q345D or equivalent | |
Tank | 316L/SAN50028-7/WNr 1.4402/1.4404 | ||
Insulation | Shell | Rock wood(50kgs/M3), Max thickness 50mm | |
Ends | Rock wood(16kgs/M3) | ||
Steam Heating | 6 runs, 110mm width stainless steel 304 | ||
Manhole | 500 low TIR provision, 8 point fixing with super tanktyt Lid seal | ||
Safety Relief | 2½” BSP Supermaxi Highflow relive, without gauze, Pressure only set at +4.4 bar (63.8psi). | ||
Air Inlet Assembly | 1.5 BSP air inlet with 1 1/2BSP connection, | ||
Bottom Discharge | 3 stainless steel foot-valve with butterfly valve and blank flange / 3 BSP cap and chain. | ||
Top Discharge | Provision only | ||
document holder | A clear plastic document holder ø 110mm is fitted to the rear right hand side beam. | ||
Decals | One set of mandatory decals is fitted. | ||
Data Plates | One set of stainless steel data plates | ||
Calibration | Yes, have it | ||
Stacking | Each container is approved for 9 high stacking. | ||
Approval | Lloyds or BV Construction Certificate, IMDG, CFR49, ADR/RID, AAR 600, CSC, TC, TIR, ISO UIC, US/UK DOT | ||
1.4 Production and inspection process_t14 iso tank container 20ft:
1.5 Click Here and view more products.
1.61. Dry Containers: 10ft, 20ft, 40hc, 45hc, Flat Rack, Side Door, etc.
1.62. Reefer Containers: 8ft, 10ft, 20ft, 40hc, 45hc etc.
1.63. Tank Containers: 10ft, 20ft, 40ft, 45ft, etc
1.64. Offshore Equipment: Container, Basket, Reefer, Workshop, etc.
1.65. Full range of Container Parts
1.66. Lashing Equipment: Twist Lock, Bridge Fitting, Turnbuckle etc.
1.67. Trailer Parts: Twistlock, Gearlock, etc.
ACE Container is a professional Container & Parts supplier in China, which has over 11 years experiencen this line, Gloden Member in Alibaba, Trade Assurance Serive in Alibaba. Also ACE Container has exported products to over 45 countries.
With development of container line, we are also further extending and improving our service, please check as follows:
4.1. Are your t14 iso tank container brand new?
Yes, all the container we provided are brand new. In fact, we will produce new container after order /confirm/iation.
4.2 Does your t14 iso tank container meet with international requirement?
Yes, all of our container will be approval by BV or LR or CCS and meet with below requirement for named Tank Container.
ISO 1496/3
UN Transport of Dangerous Goods
UIC International Rail Approval
TIR International Transport Goods under Custom Seal
CSC International Convention for Safe Containers
DOT US Code Federal Regulations CFR49
DOT UK Carriage of Dangerous Goods
CTC Canadian Transport Commission (Rail)
AAR American Association of Railroads
FRA Federal Rail Association USA
BAM G.D.R Domestic Approval
ISO/TC11
4.3 Can you provide Drawings for /confirm/iation?
Yes, we will provide drawing after order confirmed before production
4.4 Do you have Small or Large Volume Tank Container?
Sure, we could do Tank Container form 1000L to 60000L. And could produce offshore Tank as per DNV2.7-1 / EN12079 Standard.
4.5 Do you provide OEM Service?
Yes, we have a first-class team and could design as per your requirement.
PLEASE ConTACT US IF ANY QUESTIONS:
Tel: +86
Phone: +86(WhatsApp)
Skype:
QQ: 2205105610
